A Review on Development of Solar Powered Multi Crop Cutter for Harvesting

Authors

  • Pathak T. N. Diploma Student, Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India
  • Vidhate T. R. Diploma Student, Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India
  • Jadhav S. S. Diploma Student, Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India
  • Thakur S. D. Diploma Student, Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India
  • Vadnere A. P. Project Guide and Head, Department of Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India
  • Kothawade V. E. Lecturer, Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India

DOI:

https://doi.org/10.53555/mce.v3i4.523

Keywords:

Crop Cutter, Harvesting,, Solar Panel,, Rotary motion etc.

Abstract

This paper represents the project work carried on development of solar power crop cutter. We have
developed a compact mechanism for harvesting of crop cutter work on solar power so that we can an easy harvesting in minimum period of time. This set up is used to cut the multi-crops at a time, which help the small scale farmers. This cutter is been invented because of low cost, high compatibility, and use for rough use. This set up uses the solar power, which is provided with different blades, solar plate, rubber wheel, DC motor and battery arrangement which results in transmission of this solar power into rotary motion of cutter at the end of which the crops get cut easily and perform various task as per
requirement. We have made changes in the existing machine to make its application easier at reduced cost. Our main aim in Cost and pollution control is attained through this Project work.

Downloads

Download data is not yet available.

References

Sachin. M. Moghe, “A Review on Human Powered Mini Paddy Harvester”, International Journal for Engineering Applications and Technology, Vol-15, ISSN: 2321-8134.

Dr U. V. Kongre, “Fabrication of Multi-Crop Cutter”, International Journal of Research in Science and Engineering, Vol. II, Issue 3, ISSN: 2394-8299.

Zakiuddin K.S, “Design and development of the human energized chaff cutter”, New York science journal.

Pedersen S.M “Agricultural Robots-Applications and Economic Perspectives”, University of Copenhagen Vol. 21.

Robin Burgess-Limerick and et al “Sugarcane Harvesting Machine Design” I the field”, University of Queensland.

Akshay Komawar and et al “Design of Multi-Crop Cutter”, International Journal of Research in Engineering, Vol. II, Issue 3, ISSN: 2394-8280.

A. K. Pitale “A review on-flywheel motor” ISSN: 2319-5967.

VilasS. Gadhave and et al, “DesignandDevelopment of Multi crop cutter machine powered by electric motor concept”, InternationalResearch Journal of Engineering and Technology (IRJET), Volume: 04 Issue: 01, Jan -2017.

Saurabh A. Bobde and et al, “A Review on Solar Operated Agri-Cutter”, International Journal for Innovative Research in Science and Technology, Volume 3, Issue 09, February 2017.

Downloads

Published

2017-04-30

How to Cite

T. N., P., T. R., V., S. S., J., S. D., T., A. P., V., & V. E., K. (2017). A Review on Development of Solar Powered Multi Crop Cutter for Harvesting. International Journal For Research In Mechanical & Civil Engineering, 3(4), 60–64. https://doi.org/10.53555/mce.v3i4.523

Issue

Vol. 3 No. 4 (2017): International Journal For Research In Mechanical & Civil Engineering

Section

Articles

License

Copyright (c) 2017 gnpublication@

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In consideration of the journal, Green Publication taking action in reviewing and editing our manuscript, the authors undersigned hereby transfer, assign, or otherwise convey all copyright ownership to the Editorial Office of the Green Publication in the event that such work is published in the journal. Such conveyance covers any product that may derive from the published journal, whether print or electronic. Green Publication shall have the right to register copyright to the Article in its name as claimant, whether separately
or as part of the journal issue or other medium in which the Article is included.

By signing this Agreement, the author(s), and in the case of a Work Made For Hire, the employer, jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere, and is not being considered for publication elsewhere in any form, except as provided herein. Each author’s signature should appear below. The signing author(s) (and, in