A Review on Development of Flat Belt Type Oil Skimmer

Authors

  • Lokhande M. M. Diploma Student, Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India
  • Vadnere A. P. Head of Department, Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India
  • Badgujar P. P. Project Guide and Lecturer, Mechanical Engineering, MET’s Institute of Technology, Nashik, Maharastra, India

DOI:

https://doi.org/10.53555/mce.v3i4.515

Abstract

Fishing and tourism were affected by this spillage. The environmental effects of such oil spills are not negligible as this is a global problem now days. So there is need of an effective way to clean this oil from the surface without actually wasting it. This paper represents the project work carried on development of flat belt type oil skimmer. We have developed a compact mechanism for collect oil from water with the help of belt in minimum period of time. Collected oil can be reused for many
purposes. This oil skimmer is invented because of low cost, high compatibility, and use for rough. This set up uses the DC motor, polymer belt, pulley, supporting frame, polyurethane blade. We have made changes in the existing machine to make its application easier at reduced cost. Our main aim is reduce cost and control pollution control, attained through this Project work. Now, in industries, to separate oil from other things like coolant and water, we use oil skimmers. There are various methods for this, of which belt type oil skimmer is one of the majorly used.

Downloads

Download data is not yet available.

References

A M Najar, J T Turner, “Enhanced oil recovery using the rotating-disc skimmer”, Proc Instn Mech Engrs Vol 214 Part E, pp. 271-283.

A H Hammoud and M F Khalil,“Performance of a rotating drum skimmerin oil spill recovery”,J. Process Mechanical Engineering, Vol 217, Part E, pp 49-59

Suraj Nair, Kajol Kamble, Sayali Shewale, Sanjay Lohar, “Design & Fabrication of Disc Type Oil Skimmer”, IJSART, Volume 3,Issue 4 –April 2017

Tushar Pathare, Mauli Zagade, Rohan Pawar, Priteshkumar Patil, Prof. A.S. Patil “Endless Belt Type Oil Skimmer”,International Journal of Recent Research in Civil and Mechanical Engineering, Vol. 2, Issue 1, pp. 95-100

Suraj Burungale, Manoj Kamble, Avinash Deokar, Sumit kamble, Prof. Kuber K.H, “Oil Skimmer Mechanism in Sugar Factory”, International Journal of Mechanical and Industrial Technology, Vol. 3, Issue 2, pp. 174-176

Broje, V., and Keller, A. A., “Improved Mechanical Oil Spill Recovery Using an Optimized Geometry for the Skimmer Surface”, Environ. Sci. Tech.,2006, vol 40(23) pp. 7914-7918

M.Patel, “Design and efficiency ofvarious belt type oil skimmers”,International Journal of Science and Research, vol 3, pp. 2319-7036

“A Free Floating Endless Belt type oil skimmer”, Journal of United States Environmental Protection Agency Aug-1972.

Downloads

Published

2017-04-30

How to Cite

M. M., L., A. P., V., & P. P., B. (2017). A Review on Development of Flat Belt Type Oil Skimmer. International Journal For Research In Mechanical & Civil Engineering, 3(4), 103–107. https://doi.org/10.53555/mce.v3i4.515

Issue

Vol. 3 No. 4 (2017): International Journal For Research In Mechanical & Civil Engineering

Section

Articles

License

Copyright (c) 2017 gnpublication@

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In consideration of the journal, Green Publication taking action in reviewing and editing our manuscript, the authors undersigned hereby transfer, assign, or otherwise convey all copyright ownership to the Editorial Office of the Green Publication in the event that such work is published in the journal. Such conveyance covers any product that may derive from the published journal, whether print or electronic. Green Publication shall have the right to register copyright to the Article in its name as claimant, whether separately
or as part of the journal issue or other medium in which the Article is included.

By signing this Agreement, the author(s), and in the case of a Work Made For Hire, the employer, jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere, and is not being considered for publication elsewhere in any form, except as provided herein. Each author’s signature should appear below. The signing author(s) (and, in