Design and Fabrication of Vehicles Multi Wheel Nuts Tightner and Remover

Authors

  • G. Mohankumar PG Scholar, Department of Mechanical Engineering, Gnanamani College of Technology, Namakkal, Tamilnadu, India
  • K. Abin UG Student, Final year, Department of Mechanical Engineering, Gnanamani College of Technology, Namakkal, Tamilnadu, India
  • K. Akhil UG Student, Final year, Department of Mechanical Engineering, Gnanamani College of Technology, Namakkal, Tamilnadu, India
  • I. V. Akshay UG Student, Final year, Department of Mechanical Engineering, Gnanamani College of Technology, Namakkal, Tamilnadu, India
  • Jisin Alex Varghese UG Student, Final year, Department of Mechanical Engineering, Gnanamani College of Technology, Namakkal, Tamilnadu, India

DOI:

https://doi.org/10.53555/mce.v3i4.517

Keywords:

Nut tightener and remover, multiples nuts, electrical motor

Abstract

We know the standard of living had been increased, most of the families have at least single vehicle, typically a car, to move around easily and quickly. So with the increment in the number of cars so do its tyre failure. Often, the car is provided with wheel nuts remover and jack for instant replacement of the spare tyre. But it is really a difficult process. Based on this we designed vehicle multi wheel nuts tighter and remover. The remover is designed to be of easy maintenance, easy storage, easy to handle and able to remove all nuts at once. It consists of 1 lever on which the pinion gear is fixed and it is driven by an electric motor. Pinion gear drives the 4 spur gears which has 4 shafts with box spanners at the end of each shaft. Thus the all four nuts are removed at once.

Downloads

Download data is not yet available.

Author Biography

G. Mohankumar, PG Scholar, Department of Mechanical Engineering, Gnanamani College of Technology, Namakkal, Tamilnadu, India

 

 

References

Abd Azizul Rahman(MBA), Universityof MalaysiaPahang, Improvement & Optimization of Tire Nut removal, Malaysia,2008, 199-202(2012).

M. F. AbdRahim “Design, Development and Fabrication of Tyre Lug Wrench”. University Technical Malaysia Melaka (UTeM), Thesis Degree, 2007.

R. Abdurrahman, C. A. Che Ismail and M. Y. Abdullah “MechanicalMachines”.University Technology Malaysia Publisher, 2003.

V. Sarkar “Mechanics of Machines”. Tata McGraw-Hill, 2004.

E. Oberg, F. D. Jones, H. L. Horton and H. H. Ruffle (2008) “Machinery’s Handbook 28thEdition” .Industrial Press, 2008.

Abdullah, M.A, Shaharuzaman, M.A, Jenal, R., Boejang, H.,MatIdera, I.H. and MohdRazi, M.Z., Development of Conceptual Vehicle All-Wheel-Nuts Remover, Proceeding for the 2ndInternational Conference on Design and Concurrent Engineering.

R.S.Khurmi, J.KGupta, Machin, Design, S.Chand Publication.

Downloads

Published

2017-04-30

How to Cite

Mohankumar, G., Abin, K., Akhil, K., Akshay, I. V., & Varghese, J. A. (2017). Design and Fabrication of Vehicles Multi Wheel Nuts Tightner and Remover. International Journal For Research In Mechanical & Civil Engineering, 3(4), 07–12. https://doi.org/10.53555/mce.v3i4.517

Issue

Vol. 3 No. 4 (2017): International Journal For Research In Mechanical & Civil Engineering

Section

Articles

License

Copyright (c) 2017 gnpublication@

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In consideration of the journal, Green Publication taking action in reviewing and editing our manuscript, the authors undersigned hereby transfer, assign, or otherwise convey all copyright ownership to the Editorial Office of the Green Publication in the event that such work is published in the journal. Such conveyance covers any product that may derive from the published journal, whether print or electronic. Green Publication shall have the right to register copyright to the Article in its name as claimant, whether separately
or as part of the journal issue or other medium in which the Article is included.

By signing this Agreement, the author(s), and in the case of a Work Made For Hire, the employer, jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere, and is not being considered for publication elsewhere in any form, except as provided herein. Each author’s signature should appear below. The signing author(s) (and, in